Supermicro 1U Server X8DTU-F Barebones (2x Heatsink / DVD) ____ Add RAM and HDDs

Off-Lease
Some minor scratches/dings from pallet stacking

2x Intel Xeon E5504 2ghz 4 4.8 GT/s CPUs (Quad Core)
Add Your Own Memory (12 Slots – PC3-8500R / PC3-10600R)
4x Open Trays (add your own SATA 3.5″ Hard Drives)
DVD Drive
560w Power Supply

NO OS Installed

RAID 0, 1, 5, 10 support (Windows Only)
RAID 0, 1, 10 support (Linux)

Ports – Back
2x PS/2 / 2x USB / 1x Serial / 1x VGA / 2x Gigabit Ethernet

——————————————-

Product SKUs MBD-X8DTU-F -O

• X8DTU-F (Standard Retail Pack)

MBD-X8DTU-F -B

• X8DTU-F (Bulk Pack)

Physical Stats Form Factor

• Proprietary

Dimensions

• 12.075″ x 13.05″ (30.67cm x 33.15cm)

Processor/Cache CPU

• Dual 1366-pin LGA Sockets
• Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
  • Intel®
    Xeon®Processor 5600 Series (Westmere)
  • Intel®
    Xeon®Processor 5500 Series (Nehalem-EP)

QPI

• up to 6.4 GT/s

System Memory Memory Capacity

• 12x 240-pin DIMM sockets
• Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
• Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
• Memory Mirroring supported

Memory Type

• 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

• 1GB, 2GB, 4GB , 8GB , 16GB

Memory Voltage

• 1.5 V / 1.35V

Error Detection

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices Chipset

• Intel® 5520 (Tylersburg) chipset
• ICH10R + IOH-36D

SATA

• Intel ICH10R SATA 3.0Gbps Controller
• RAID 0, 1, 5, 10 support (Windows)
• RAID 0, 1, 10 support (Linux)

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Winbond® WPCM450 BMC

Network Controllers

• Intel® 82576 Dual-Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• Intel® I/OAT 3 support for fast, scaleable, and reliable networking
• VMDq support for better performance of virtualization
• 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

• Matrox G200eW

Super I/O

• Winbond 83827HF chip

Input / Output Serial ATA

• Six Serial ATA ports
• Six SATA hard drives supported

LAN

• 2x RJ45 LAN ports
• 1x RJ45 Dedicated IPMI LAN port

USB

• 2x USB rear ports
• 2x USB on-board
• 4x USB internal headers
• Total 8 USB 2.0 Compliant

VGA

• 1x VGA Port

Keyboard / Mouse

• PS/2 keyboard and mouse ports

Serial Port / Header

• 1 Fast UART 16550 serial port
• 1 Fast UART 16550 serial header (Option)

Chassis ( Optimized for X8DTU-F ) 1U Chassis

• CSE-812L-600UB

2U Chassis

• CSE-826A-R1200UB
• CSE-826E16-R1200UB
• CSE-826E26-R1200UB

Tower / 4U Rackmount

• CSE-847E1-R1400UB
• CSE-847E2-R1400UB

Important Chassis Notes

• To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.

Expansion Slots PCI-Express / PCI-X / UIO

• • Left Side

 

• • 1 (x16) PCI-E 2.0 + 1 UIO slots or
  • 1 (x16) PCI-E 2.0

Right Side

• 2 LAN optional

 

 

• For 2U configuration, Please go to UIO Riser Cards page

 

System BIOS BIOS Type

• 32Mb SPI Flash EEPROM with AMI® BIOS

BIOS Features

• Plug and Play (PnP)
• PCI 2.2
• ACPI up to 3.0
• USB Keyboard support

Management Software

• IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
• SuperDoctor® III

Power Configurations

• ACPI / ACPM Power Management

PC Health Monitoring Voltage

• Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
• 6-Phase-switching voltage regulator

FAN

• Total of eight fan headers supporting up to 8 fans
• Eight 4-pin fan headers
• 8x fans with tachometer status monitoring
• Support 3-pin fans (w/o speed control)
• Low noise fan speed control (4-pin fan only)

Temperature

• Monitoring for CPU and chassis environment
• Thermal Control for 8x fan connectors
• PECI

Other Features

• Chassis intrusion detection
• Chassis intrusion header

Operating Environment / Compliance RoHS

• RoHS Compliant 6/6, Pb Free

Environmental Spec.

• Operating Temperature: 10° to 35° C (50° to 95°F)
• Non-operating Temperature: -40° to 70° C (-40° to 158° F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)